cross-talk, interference?

Hello,

Should one expect problems, e.g. interference, when deploying a Vector very near (~10-50 cm)

a 2MHz HR Aquadopp?

What if the Vector's sampling volume is inside one of the HR Aquadopp bins?

Best,

Ayal

Dear Ayal, there is nobody at Nortek that can give a definitive answer -- I don't think we have ever tried.  My instinct says no problem since the frequencies are quite different and because the two systems don't share anything (like cables or power supply). 

Best, Atle Lohrmann 

Darn, hate to be the first to try ...

Best,

Ayal

Previously Atle Lohrmann wrote:

Dear Ayal, there is nobody at Nortek that can give a definitive answer -- I don't think we have ever tried.  My instinct says no problem since the frequencies are quite different and because the two systems don't share anything (like cables or power supply). 

Best, Atle Lohrmann

Hi Ayal,

I was just wondering if you have tried this configuration and weather this have caused any interference in the results?

Thanks,

Maryam

Previously Ayal Anis wrote:

Hello,

Should one expect problems, e.g. interference, when deploying a Vector very near (~10-50 cm)

a 2MHz HR Aquadopp?

What if the Vector's sampling volume is inside one of the HR Aquadopp bins?

 

Best,

Ayal

 

 

Not that I could notice.

Ayal